a jumperless breadboard
-
Updated
Oct 13, 2023 - C++
a jumperless breadboard
DCF77-clock with RTC backup and 8-digit alphanumeric LED-display on ATtiny 412/814/1614, ATmega 4809 or AVRxxDD14
Core-Independent WS2812B Driver for Arduino Nano Every (i.e. ATmega4809)
This library enables you to use Interrupt from Hardware Timers on an ATmega4809-based board, such as Arduino UNO WiFi Rev2, AVR_NANO_EVERY, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their exec…
This library enables you to use Hardware-based PWM channels on megaAVR-based boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Some small LED-blinking test programs for the AVR microcontrollers
This library enables you to use ISR-based PWM channels on Arduino megaAVR boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is …
Vertical slice of the motor drive electronics for the OrangeBot robot for the PiWars 2020.
Capture data from IVT-490 exhaust air heat pump using an Arduino Uno Wifi Rev2
2024-1 임베디드시스템설계, 외발로 좌우 중심을 잡는 로봇
Test bench to develop a 16b fixed point PID class for OrangeBot
Windows GUI tool for flashing ATmega4809 via SerialUPDI
AVR0/1 tiny/mega spi hardware abstraction library
Add quad channel quadrature encoder decoding to "OrangeBot" robot
AVR0/1 tiny/mega software twi hardware abstraction library
This firmware is able to successfully decode four quadrature encoder channels and communicate the count to the Raspberry Pi
AVR0/1 tiny/mega system clock hardware abstraction library
To associate your repository with the atmega4809 topic, visit your repo's landing page and select "manage topics."