From fbf730279ca25711b5917cfefe99f2257c29405e Mon Sep 17 00:00:00 2001 From: Eshitha Oyyavuru Date: Thu, 29 Oct 2026 16:34:41 +0530 Subject: [PATCH] PENDING: arm64: dts: qcom: monaco-evk-staging: fix missing Ethernet interfaces On some boards, the MDIO bus fails to discover the PHY because it returns no valid reset values. Port 0 uses an AQR113C PHY with its active-low RST_N pin connected to a TLMM GPIO. Configure the reset GPIO with the correct polarity so the PHY is reset before MDIO discovery. PHY discovery then succeeds on both the affected boards and the boards that were already working. Signed-off-by: Eshitha Oyyavuru --- arch/arm64/boot/dts/qcom/monaco-evk-staging.dtso | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-staging.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-staging.dtso index 75cf03300c27b..18d3681b0db82 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk-staging.dtso +++ b/arch/arm64/boot/dts/qcom/monaco-evk-staging.dtso @@ -33,7 +33,7 @@ nvmem-cell-names = "mac-address"; pinctrl-names = "default"; pinctrl-0 = <&aqr_intn_wol_sig>; - phy-reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; reset-deassert-us = <221000>; };